压电阻抗技术监测固体推进剂老化研究

为了进一步研究表面粘贴式的主动传感技术——压电阻抗技术(EMI, Electro-Mechanical Impedance)监测固体推进剂的老化,构建了基于线粘弹杆结构的一维机电耦合模型,根据粘弹性波的理论与边界条件进行分析,建立一种线粘弹结构动态模量与其机械阻抗的表征关系,并对构建的机电耦合阻抗模型进行了数值计算及试验验证。针对HTPB固体推进剂开展高温热加速老化试验及压电主动激励试验,根据监测所得导纳频谱并通过提取结构机械阻抗进行分析,结果表明:压电陶瓷片与推进剂结构在高频机电耦合运动时(300kHz,280kHz)有明显的共振现象,结构固有频率高于机电耦合共振频率,并且在200kHz～400kHz频段与700kHz～900kHz频段内,结构机械阻抗频谱峰值会因固体推进剂的热老化时间增长而降低,且与热老化时间之间满足线性关系。由此可见,压电阻抗法能够与固体推进剂在力学性能上建立表征关系,通过得到固体推进剂结构机械阻抗能够监测其老化损伤。     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

飞机机头附近液态水含量分布规律的数值研究

在飞行器飞行过程中,安装在机头上的各类传感器结冰会对飞机的飞行安全产生不利影响。而液态水含量是影响飞机结冰的重要参数,为了更好地进行传感器结构及布局设计,对机头附近液态水含量分布规律进行数值研究。采用计算流体力学方法对飞机飞行时的空气-过冷水滴的稀疏两相流场进行数值模拟,通过求解N-S方程获得空气流场,采用欧拉法求解水滴运动场得到水滴运动轨迹。分析在不同来流马赫数、来流迎角及液滴直径等条件下,机头关键截面上广义水滴遮蔽高度的变化及机头关键位置上液态水含量的变化规律,研究不同状态参数对液态水含量分布的影响。结果表明:水滴遮蔽高度及浓度增加区范围随马赫数增大而增加,迎角的变化对机头上下表面液态水含量分布产生相反的影响。     

基于网格变形的伴随方法在翼型优化中的应用

进行了基于网格变形的伴随方法在翼型气动优化设计中应用的研究。随着集成了伴随方法的流场求解器的普及和效率的不断提高,采用梯度法进行翼型气动优化设计的主要计算花费逐渐由计算梯度对流场变量的敏感度（或流场敏感度）转变为计算梯度对网格变形的敏感度（或网格敏感度）,后者的求解通常采用有限差分方法,计算花费较高。在传统伴随方法（或流场伴随方法）的基础上,引入了基于网格变形的伴随方法（或网格伴随方法）,采用网格伴随方法计算梯度,可以大幅度减少梯度计算花费,提高翼型气动优化设计的效率。     

复合材料帽形加筋结构稳定性研究

建立了复合材料帽形加筋结构的参数化有限元模型,给出了两种进行层板结合处的模拟计算方法,通过计算得到了模型的屈曲载荷并总结了加筋结构几何参数对结构稳定性的影响,给出了模型的收敛性分析,对比了模型网格密度对于计算结果的影响,找到最佳的网格密度,提高了模型计算的效率和准确性,为实际的结构设计提供了重要参考,为结构分析提供了依据。     

基于动力学约束的实时弹道滑动处理方法

应用卫星短弧定轨理论,根据导弹运动特性建立被动段弹道动力学模型来约束其运动,研究了基于动力学约束的实时弹道滑动处理方法,能有效地提高弹道的定轨精度和稳定性。同时通过设计合理的累积窗口和滑动窗口宽度,可实现弹道处理近实时的快速计算。仿真结果表明,将该方法用于被动段实时弹道处理,其速度精度可提高1～2个量级,明显地克服了滤波定轨的收敛时间较长和单点定位精度较差的不足。     

在轨服务的相对运动耦合动力学建模与分析

研究在轨服务航天器逼近与捕获目标航天器的相对轨道姿态耦合动力学建模问题。考虑航天器姿态与对接位置的运动耦合,建立目标运行在任意轨道下的相对轨道姿态耦合动力学模型,并对模型中的运动耦合进行深入分析。设计一种非线性的输出反馈姿态控制律,将建立耦合动力学模型与CW方程进行仿真比较,验证轨道与姿态的运动耦合对两航天器对接点之间相对位置的运动影响。     

单周期冲跃飞行轨迹性能参数影响程度分析

对高超声速飞行器的单周期冲跃飞行轨迹进行了研究。建立了动力学模型和约束条件。仿真分析了升阻比、初始速度和初始弹道倾角对飞行轨迹性能的影响,并讨论了影响程度,确定了适于该飞行器的最佳飞行走廊,为后续的冲跃飞行轨迹完整设计和优化提供了参考。